Monday, July 17, 2017

Gelli Arts® Printing with Flexible Texture Plates

Printing with Flexible Texture Plates on Gelli Arts® Gel Printing Plates
by Birgit Koopsen

Hello and welcome to the Gelli Arts® blog! It’s Birgit here and I am going to show you how you can easily create flexible texture plates for printing on Gelli Arts® gel printing plates.  Flexible texture plates have several   benefits compared to texture plates created on cardboard or wood or using just the foam.


Let’s start with the supplies you need: self-adhesive craft foam, acetate sheets, a pen or pencil, scissors and an embossing tool or skewer.
I used the 8”x10” Gelli Arts® gel printing plate and DecoArt Media Fluid Acrylics to create my prints.



Start with drawing shapes on the back of the foam sheets and cut them out.

 

Use the embossing tool or skewer to add texture to the craft foam shapes.


Apply a piece of craft foam to an acetate sheet that is just a little bit bigger than the craft foam. About 1cm/0.4” bigger on all sides.


Create a nice composition with the foam shapes.


To create the triangles, I first added texture to a whole sheet of craft foam, then cut strips and then cut triangles from the strips. No need to draw the triangles on the back unless you want them all to be the exact same size.


You can make the plates any size or shape you want as long as you always make sure to have to acetate sheet a little bit bigger than the foam.



Benefit no. 1:
Applying the foam to an acetate sheet will keep the plates flat, the edges will not curl and the plates are easier to handle and store.


Benefit no. 2:
Because the acetate is a little bit bigger than the foam it is easier to remove the texture plate from the Gelli Arts® printing plate without touching the paint and ruining your print.




(After making a print you can use the left-over paint on the texture plates to stamp)


Benefit no. 3:
The acetate sheets are flexible which gives you the possibility to only use a part of the plate. You would not be able to do this when using cardboard or wood as a base for your texture plates.





And now you are ready to play!









Supplies
Self-adhesive backed craft foam
Acetate sheets
Embossing tool or skewer
Scissors
Pen or Pencil
Gelli Arts® gel printing plate - 8x10 used in this blog
Media Fluid Acrylic Paint from DecoArt
Thank you for stopping by! Happy Printing!




29 comments:

  1. Birgit has done it again! I love also that the foam is so inexpensive. Incidentally, I recently took my GelliArts plate with me on a trip to Ireland, and printed lots of leaves not commonly found anywhere else. I am using her technique for making a book with sticky double sided tape to make a journal where I can record special memories of the trip. Brigit is ThE BEST!

    ReplyDelete
    Replies
    1. Ahwww, thank you so much Susan!! x

      Delete
  2. That's an easy way to make wonderful pages : thank you so much...

    ReplyDelete
  3. Could you please tell us what thickness of acetate sheets you used?

    ReplyDelete
    Replies
    1. I used binding presentation covers. Bought them at a Dutch store but pretty sure you will find them at Staples too. Go for the heavier ones as the thinner ones will be to limp. Hope that helps 😊

      Delete
  4. Absolutely brilliant!!!
    ~ Christina in FL

    ReplyDelete
  5. Agreed...would love to know the acetate thickness. Do old overhead sheets work? Would love to do tjis with school kids.

    ReplyDelete
    Replies
    1. I'm pretty sure overhead sheets would work. I used binding presentation covers. Bought them at a Dutch store but pretty sure you will find them at Staples too. Go for the heavier ones as the thinner ones will be to limp. Hope that helps 😊

      Delete
    2. Yes the ovehead sheets would work but they are expensive!

      Delete
  6. Great ideas! I had used the foam sheets but the acetate is a great improvement!

    ReplyDelete
  7. Brilliantly fun and simple! Thanks for inspiring!

    ReplyDelete
  8. Acetate sheets are expensive! I love this idea but I used tabbed binder dividers from the dollar store and just cut them down to size.

    ReplyDelete
  9. Is there a reason why the foam cutouts are not directly applied to the acetate sheet thus saving the extra craft foam for other cutouts?

    ReplyDelete
  10. I have made many of these foam plates, but I've stuck the foam straight onto cardboard- I cannot find any acetate sheets in my local hobby stores, where can you get them? At Staples? Great fun with them, but would like to vary a bit too.. I noticed however, that the prints get less and less crispy as the paint gets a bit stuck on them. You dry off the paint after every use? Or is it wise to use that particular point for best result?

    ReplyDelete
  11. Hoever, texture is a good idea, so will definitely try that, thanks!

    ReplyDelete
  12. I am deeply in love with every single piece of information you post here. Will be back often to read more updates!

    companies that do home staging

    ReplyDelete
  13. Thanks for another wonderful post. Where else could anybody get that type of info in such an ideal way of writing?
    printing

    ReplyDelete
  14. Howdy, I discovered your blog through Google while hunting down such kinda instructive post and your post looks extremely intriguing for me.
    Cheap Prints Services Near Me

    ReplyDelete
  15. Great post, and great website. Thanks for the information!
    pull up banner

    ReplyDelete

Thanks so much for taking the time to comment on our blog! We hope you find it fun and helpful in your artistic endeavors!

We will try my best to answer your questions and provide good, helpful information in a timely manner.

We look forward to hearing from you and thank you for stopping by!
Happy Printing!
Gelli Arts®

You might also like:

Related Posts Plugin for WordPress, Blogger...